EPI Forcem SL Self levelling floors

All layers of the EPI Forcem SL systems are made of the same material
and thus form a monolithic and absolutely tight flooring system.

Strong and sustainable PU cement self levelling floor

All layers of the EPI Forcem systems, i.e. the scratch coat, the self-levelling floor, mortar and the top coat, are made of the same material and thus form a monolithic and absolutely tight flooring system. Both in wet (clean water) and in dry condition they posess good anti-skid properties, even without broadcast. For increased anti-skid properties in combination with e.g. water / grease / oil / powder, etc., the EPI Forcem SL SR and EPI Forcem MT SR systems are available.

Product properties

  • Long lifespan
  • Impermeable and non-porous
  • Wear-resistant
  • Excellent mechanical properties (depending on layer thickness)
  • Excellent thermal properties – 20°C to + 120 ºC. (depending on layer thickness)
  • Excellent chemical properties
  • Seamless
  • Very low emission
  • Fully solvent-free
  • Odourless
  • Easy to clean and to maintain

EPI Forcem SL

Medium-duty polyurethane-cement screed with a smooth finish.
Forcem SL is used in dry processing, packaging and storage areas with light to medium traffic and occasional spillage of chemicals.

EPI Forcem SL-Q

Medium-duty polyurethane-cement screed with a decorative textured surface. Forcem SL-Q is used in wet processing, packaging- and storage areas with exceptional resistance against medium traffic, aggressive chemicals, impact and thermal loads.

EPI Forcem SL SR

Heavy duty polyurethane-cement screed with textured finish. Forcem SL-SR is used in wet processing, packaging and storage areas with exceptional resistance to medium and heavy traffic, aggressive chemicals, impact and thermal shock situations.

Sustainability and the environment

EPI Forcem floor systems are odorless and do not contain pine oil with xylene that can contaminate food products. All EPI Forcem floor systems have been tested by Eurofins.

Eurofins test report 392-2020-00219003_A/H/I_EN

Meet our floors

As we produce the floors in our own factory we have extensive knowledge in house to give you tailored advice. Contact us via the form below or call  our specialists direct.

+31 (0)30 293 36 64

info@epigroup.nl

Want to see our projects?

Check our references >